O With the three “Data” clickable boxes, you can select what kind of data should be transmitted from/to PC: only the current set or all presets from internal bank or card bank. O “Direction: PC->DCX2496” is used only to store the current PC settings to the DCX2496, or if you want to transmit the data edited offline to the DCX2496. On the right you will find the “Device Information” of the selected “Recognized Device.”.
In this example, there is only one unit, called “DCX2496,” so you can’t select another DCX2496. “Recognized Devices” & “Device Information” On the left window “Recognized Devices” you can select the particular DCX2496 that you wish to edit.The most frequent source of error in communication between the PC remote software and the DCX2496 hardware are wrong settings of DCX2496 parameters DEVICE ID and PORT on the hardware (described above) as well as incorrect usage of the PC software in CONNECT menu (described below).In the example below, the units 1 and 3 have to be set to TERM = ON, the middle unit 2 has to be set to TERM = OFF. The first and the last DCX2496 with an RS-485 (!) connection has to be terminated (back: TERM = ON), the DCX2496s in-between have to be set to TERM = OFF. LINK A or B, both connections are parallel.It doesn’t matter if you DCX2496 is daisy chained via the. In this mode, you connect the first DCX2496 to the COM port of your PC via a RS-232 cable the 2 via the LINK connectors A or B on the rear of each DCX2496.
Here you can select between three modes: and 2 DCX2496 for PC editing.page 19 DCX2.
This manual was created to facilitate better understanding of how the DCX2496 remote software works when used with multiple units.Editor Software V1.16 Remote Software V1.16a.
Get the guaranteed best price on Crossovers like the Behringer ULTRA-DRIVE PRO DCX2496 Crossover. The DCX2496 is the perfect way to manage a multi-speaker sound system in any sized venue. Behringer: ULTRADRIVE PRO DCX2496 Apps Editor Software.